Ballnose Feed-Direction Cusp and the Governing Finish
The cusp ballnose-scallop-height names as separate: the one ALONG the feed. It is the same geometry rotated ninety degrees, h = R - sqrt(R^2 - (fz/2)^2) with feed per tooth in place of stepover -- and the reason to see both at once is that the surface you get is the LARGER of the two. A 1/2 in ballnose at 0.030 in stepover and 0.006 in per tooth leaves 0.000450 in across the passes and only 0.000018 in along the feed, so the stepover governs by 25x and tightening the feed for finish is wasted cycle time. The two balance exactly when feed per tooth equals stepover. Both scale with the SQUARE of their spacing, so halving either cuts its cusp by four. Geometric headroom on the feed is not permission -- chip load, deflection, and the machine usually bind first; it only means finish is not the reason to hold back.
Formula and source
cusp h = R - sqrt(R^2 - (w/2)^2) evaluated twice: with w = stepover for the cusp across the passes (delegated to ballnose-scallop-height) and with w = feed per tooth for the cusp along the feed. Governing cusp = max of the two; the two are equal when feed per tooth = stepover. Near the bottom both reduce to w^2/(8R). Feedrate = feed per tooth x flutes x rpm.
Ballnose cusp geometry as used in CAM and mold machining. Both directions are the same circular-segment construction; nothing here is tabulated or proprietary.
Audience
This tile is built for trades and the adjacent professions in the Mechanic - Auto, Marine, Aviation group. The interactive calculator runs entirely in your browser. No account, no fee, no advertising, no tracking.
Related tools
Posture
Rough Logic answers the math question the working professional asks on the job. The site is a calm, fast, ad-free, account-free, ever-free reference. It does not interpret code. It does not replace the licensed professional. It does not store your inputs. The Authority Having Jurisdiction governs all installations and inspections.